Time_total
|
time_Full_load +time_Shutdown +time_Standby +time_Startup
|
4.0
|
|
|
|
%
| seconds (s) |
Elect_Consum_Shutdown
|
|
0.00333
|
|
|
|
%
| Corresponds to energy consumption during the Shutdown process in kwh/s |
Aluminium_consum_Total
|
aluminium_consum *Time_Full_load
|
0.0539
|
|
|
|
%
| kg per cycle |
tool_wear_start
|
|
0.00509
|
|
|
|
%
| Refers to the amount of machining tool that is placed before the process in units/s |
waste_water
|
|
1.0E-4
|
|
|
|
%
| Corresponds to the amount of effluent that leaves the machining process in liters/s |
alumiun_chips
|
|
0.00205
|
|
|
|
%
| Corresponds to the amount of chip removed from machining in Kg / s |
recovered_sintetic_fluid
|
|
0.00204
|
|
|
|
%
| Refers the amount of cutting fluid recovered after machining in kg/s |
Aluminium_parts_total
|
aluminium_parts *Time_Full_load
|
0.0518
|
|
|
|
%
| kg per cycle |
aluminium_consum
|
|
0.0539
|
|
|
|
%
| Corresponds to the entrance of aluminum tubes for the machining process in Kg/s |
Consum_Total_Electricity
|
(Elect_Consum_Full_load *Time_Full_load + Elect_Consum_Shutdown *Time_Shutdown +Elect_Consum_Standby *Time_Standby +Elect_Consum_Startup *Time_Startup )
|
0.016239999999999997
|
|
|
|
%
| electricity per cycle |
aluminium_parts
|
|
0.0518
|
|
|
|
%
| Represents the amount of everything machined in Kg / s |
Elect_Consum_Full_load
|
|
0.00625
|
|
|
|
%
| Corresponds to energy consumption during the Full load process in kwh/s |
Elect_Consum_Startup
|
|
0.00336
|
|
|
|
%
| Corresponds to energy consumption during the process of starting the machine in Kwh/s |
Recovered_sintetic_fluid_total
|
recovered_sintetic_fluid *Time_Full_load
|
0.00204
|
|
|
|
%
| kg per cycle |
Waste_water_total
|
waste_water *Time_Full_load
|
1.0E-4
|
|
|
|
%
| litros per cycle |
Time_Startup
|
|
1.0
|
|
|
|
%
| Corresponds to the total time to start the machine in seconds (s) |
Alumiun_chips_total
|
alumiun_chips *Time_Full_load
|
0.00205
|
|
|
|
%
| kg per cycle |
tool_wear_reuse
|
|
0.00503
|
|
|
|
%
| Refers to the amount of machining tool that is used after the process in units/s |
Time_Shutdown
|
|
1.0
|
|
|
|
%
| Corresponds to the total machine shutdown time in seconds (s) |
Sintetic_fluid_consum
|
|
0.02045
|
|
|
|
%
| Refers the amount of cutting fluid consumed during machining in Kg/s |
Time_Standby
|
|
1.0
|
|
|
|
%
| Corresponds to the total machine wait time in seconds (s) |
Elect_Consum_Standby
|
|
0.0033
|
|
|
|
%
| Corresponds to energy consumption during the machine waiting process in Kwh/s |
Time_Full_load
|
|
1.0
|
|
|
|
%
| Corresponds to the total time of full load mode or machine operation in seconds (s) |
Tool_wear_waste_total
|
(tool_wear_start - tool_wear_reuse )*time_Full_load
|
6.000000000000016E-5
|
|
|
|
%
| units per cycle |
compressed_air_consum
|
|
0.001
|
|
|
|
%
| Refers to compressed air consumption in Nm3 / s |
Compressed_air_consum_total
|
compressed_air_consum *Time_Full_load
|
0.001
|
|
|
|
%
| Nm3 per cycle |
Sintetic_fluid_consum_total
|
Sintetic_fluid_consum *Time_Full_load
|
0.02045
|
|
|
|
%
| kg per cycle |
Tool_wear_start_total
|
tool_wear_start *time_Full_load
|
0.00509
|
|
|
|
%
| itnes per cycle |
gd_price_waste
|
|
0.5
|
|
|
|
%
| This parameter was added by GreenDelta during the implementation of the ecoinvent database in openLCA. It is used by those exchanges which did not have a price specified by ecoinvent for being wastes (i.e. negative reference product), and that were considered that they should have a cost/revenue specified. The prices used for them, equal to the prices of the same product in other processes of the database, are modified by this parameter with value 0.5 (i.e. half the price of the normal product), considering that the reference product of a waste treatment process might have a lower price in reality than the same flow produced by a production process. However, you can modify this value to 0 if you prefer to consider no price for them like ecoinvent, or also 1 if you do not want to distinguish wastes from other products. |
gd_price_product
|
|
1.0
|
|
|
|
%
| This parameter was added by GreenDelta during the implementation of the ecoinvent database in openLCA. It is used by those exchanges which did not have a price specified by ecoinvent and that were considered to be products or co-products of waste treatments (i.e. positive reference product), and that they should have a cost/revenue specified. The prices used for them, equal to the prices of the same product in other processes of the database, are modified by this parameter with value 1. However, you can modify this value to 0 if you prefer to consider no price for them like ecoinvent. |
ei_price_product
|
|
1.0
|
|
|
|
%
| This parameter was added by GreenDelta during the implementation of the ecoinvent database in openLCA. It is used by those exchanges which did not have a price specified by ecoinvent in this specific system model, but yes in at least one of the other two system models. The prices used for them, equal to the prices of the same product and provider in the other system model, are modified by this parameter with value 1. However, you can modify this value to 0 if you prefer to consider no price for them in this system model like ecoinvent. |
temp_olca_param31
|
aluminium_parts_total
|
0.0518
|
|
|
|
%
| |
temp_olca_param32
|
alumiun_chips_total
|
0.00205
|
|
|
|
%
| |
temp_olca_param33
|
tool_wear_start_total
|
0.00509
|
|
|
|
%
| |
temp_olca_param34
|
recovered_sintetic_fluid_total
|
0.00204
|
|
|
|
%
| |
temp_olca_param35
|
waste_water_total
|
1.0E-4
|
|
|
|
%
| |
temp_olca_param36
|
compressed_air_consum_total
|
0.001
|
|
|
|
%
| |
temp_olca_param37
|
tool_wear_waste_total
|
6.000000000000016E-5
|
|
|
|
%
| |
temp_olca_param38
|
aluminium_consum_Total
|
0.0539
|
|
|
|
%
| |
temp_olca_param39
|
sintetic_fluid_consum_total
|
0.02045
|
|
|
|
%
| |
temp_olca_param40
|
consum_Total_Electricity
|
0.016239999999999997
|
|
|
|
%
| |